Archive for the ‘Uncategorized’ Category

Water Damaged Carpets and Mold Growth

Uncategorized | Posted by
Oct 18 2014

Water Damaged Carpets and Mold Growth

The best way to get rid of the mold growth

When your carpet gets damaged by the water, the first possibility is that mold would grow on it or beneath the padding. This is an alarming situation because mold growth is not good for you and your carpet as well. As soon as your carpet experiences water damage you should try to restore it because a prolonged exposure to the moisture could worsen the situation. The best way to restore a carpet from water damage is to kill the mold spores for this call los angeles water damage restoration. This could be done in two ways. You can replace your carpet with a new one or you can kill the spores by using a cleaning agent. There are several products available in the market that clean the mold and also prevent it from growing back.

Following are the steps to be carried out for the cleaning of the mold spores from water damaged carpet.

Step no: 1

Inspection of the carpet

First of all inspect the carpet and the exact place where the mold growth has occurred. In this way you can easily assess the damage and the level of the damage.

Step no: 2

Fixation of Problem

Now when you have identified the problematic area you can now easily fix the problem. you can use natural products for the mold removal or other products are also available in the market. These products make a barrier known as encapsulate against the mold growth.

Mold spores easily travel to other areas of the home with help of air. So keep in mind that the room must be sealed to avoid the spreading of mold spores.

Step no: 3

Removing the carpet

The tack strips below the carpet might have mold or mildew so remove those strips immediately. If you are not cleaning your carpet and are not willing to remove the mold from it then the best option is to replace it with a new one. This could help you to avoid the mold growth in the carpet. mold growth has adverse effects on the human health.

Step no: 4

HEPA Vacuums

After cleaning up the carpet or removing the carpet, you must use the HEPA vacuums so that the mold spores in the air could be removed.

Step no: 5

Killing Mold Spores

Mold spores can be killed with the help of chlorine dioxide. This is effective for killing the mold and mildew.Top of Form

 

 

Categories of Water Damage

Uncategorized | Posted by
Oct 18 2014

Categories of Water Damage

All that is fine and well, but what about the actual damage that these classes of water have done to your house? That’s where the categories of water damage come in. These four categories allow us to describe the actual damage that is being done to your home and helps you describe the situation to both us here at OHI and to your insurance company.

  • Category 1 Water Damage (Slow Evaporation Rate): Water losses that affect only part of a room or area, or losses with lower presence/porosity materials (e.g., plywood, particle board, structural wood, VCT, concrete). Little or no wet carpet or padding is present. Minimum moisture is absorbed by materials, releasing moisture slowly.
  • Category 2 Water Damage – (Fast Evaporation Rate): Water losses that affect an entire room or carpet and cushion. Water has picked up walls 12? – 24”. There is moisture remaining in structural materials (e.g., plywood, particleboard, structural wood, concrete).
  • Category 3 Water Damage – (Fastest Evaporation Rate): Water may have come from overhead. Ceilings, walls, insulation, carpet, cushion and sub-floor in the entire area are saturated.
  • Category 4 Water Damage – (Specialty Drying Situations): These consist of wet materials with very low presence/porosity (hardwood, plaster, brick, concrete, stone). Typically, there are deep pockets of saturation, which requires very low specific humidity.

Again, the important thing to keep in mind is that a Category 1 situation can quickly become a Category 4 situation — all it takes is a homeowner who lets things get worse due to negligence. The good news is that the more you know and do before OHI arrives on the scene, the smoother the process will be.

If you have any questions about the classes of both water and water damage that we’ve detailed above, leave a comment in the comment section below. If you are experiencing water damage to your home yourself, get in contact with us so one of our experts like los angeles water damage restoration can come take a look at your situation as soon as possible.

 

 

Fire damage to lawn

Uncategorized | Posted by
Sep 21 2014

 

 

Sometimes when fire breaks out in homes, it extends to the gardens and lawns in the backyards. This fire burns the grass and turns it into ashes. Some times the fire breaks out only in lawns due to lightning of fireworks etc.  In either case, the los angeles fire damage to the lawn can become severe. Following are some useful tips that can help in fixing the damage caused by the fire in lawn. Most of the home owners are not interested in gardening and they do not know how to take care of the lawn. So when the lawn gets damaged by the fire, they do not know what to do with the problem and how to fix the damage. They do not want to live in ashed backyards so they call experts from a fire damage restoration company.

Expert’s opinion and the fire damage to lawn

  • Reseeding of lawn

Experts say that when your lawn is damaged by the fire then you must re-seed it. This is the best possible solution to fix the damage. The slight fire damage is not a total loss in fact the ashes are good fertilizer and grass can grow very well if the soil is fertilized. The seeds must be protected with a good floating covers so that the birds may not eat them up or they might not be washed away with heavy rains.

 

  • Insect and weed killing

 

Sometimes the pest insects and weeds are also eliminated through the slight fires and your garden become insect and weed free. Re-seeding is very important after your lawn has been fried from fire.

 

  • Organic fertilizer

 

Organic fertilizers must be used after the fire damage. This fertilizer will help you to avoid further loss to the lawn.

 

  • Regeneration of growth

 

The fire in the lawn is not always a curse and sometimes people intentionally put their lawns on fire to regenerate the growth.

 

  • Plantation of tons of grass

 

After the los angeles fire damage, if the lawn has been burnt completely then you must plant tons of new grass and wait for sometime and see the results. You have to water it properly. You can plant it in the entire lawn or only in the flower/veggie beds. The soil of you lawn is much fertilized and it is also weed free. This is the best time to plant new grass in your lawn.

 

  • Moistening the seeds

 

Moistening of seed is very necessary. The soaked seeds will have strong roots and fresher look.

 

 

 

Smoke damage and electronic items in your house

Uncategorized | Posted by
Sep 21 2014

los angeles Smoke damage can be devastating as smoke contains a large number of different chemicals. These chemicals include hydrochloric, nitric and sulfuric acid. These chemicals are formed when sulfur containing products burn in a fire. Nitric acid is formed when the fires burn at very high temperatures. Due to these high temperatures the nitrous oxide gas is formed and that in turn produces nitric acid.  The smoke is therefore corrosive and damaging. The corrosiveness can be measured by corrosion index. The smoke damages the electronic equipments in your house and these equipments are so sensitive that they can be totally damaged by even a small amount of corrosion.

 

The electronic equipments and the smoke damage

Smoke damage to the electronic equipments can be more damaging as compared to the fire damage itself. This is because the nature of smoke residues is acidic and it corrodes the metals, glass and plastic products. The electronics are made up of the three materials mentioned above and that is why the smoke damages the electronic items severely. The soot and the water combination can be exponentially damaging for the electronics in your home. This is because this combination increases the acidic strength of the soot and the items that are exposed to the soot for a prolonged period of time are at more risk of the los angeles smoke damage. The acids mentioned above become active and they must be eliminated and removed with the help of cleaning procedure. This removal must be done as soon as possible. The smoke damaged equipments can be saved and re-used accordingly. These equipments must be cleaned and tested for re-usage under the instructions of an expert that knows properly how to handle a smoke damaged electronic item. The electronic items are sensitive and require care for cleaning. The fire damage restoration experts have proper training and tools that are needed to recover the electronic items after they have been damaged by the fire and smoke. Full and thorough knowledge about all the procedure of recovery is very necessary so that sensitive equipments can be recovered easily. These experts are therefore suitable for this job. The smoke and fire can damage the cables of the equipments and the inner machinery that is very sensitive. The fire damage restoration experts have all the necessary training as well as the tools and equipments that are needed to repair the damaged machinery and cables of damaged item.

 

 

Steps to be followed after a fire in your house

Uncategorized | Posted by
Sep 21 2014

 
Whenever fire breaks out in your home, this is a frightening and horrible experience for you. You might loose your precious belongings as well as you might suffer severe loss of you house’s infrastructure. Whatever the loss and after effects might be, you must know what to do after the fire has been extinguished. You have to follow these steps to avoid further loss,

Step no: 1

Entering into the home after a fire

You must not enter the building that has been damaged by fire until and unless experts and professionals do not advise you to enter. This will help you in saving your life a s fire damaged building can be severely damaging for your life.

Step no: 2

Calling the family

First of all call your family and friends that were not with you and tell them that you are really ok and explain them the situation.

Step no: 3

Calling the insurer

After this you have to call your insurance company immediately so that your insurer comes to know about the loss and the extent of the loss. The insurance company will also help you in clean up options.

Step no: 4

Calling the owner/landlord

Now if you are a tenant then you must call your landlord/owner and tell him about the details of the incident.

Step no: 5

Fire report

The fire report has all the details about the incident that can help the insurer and the owner/landlord of your house. Details include date and time of incident, structure of house, extent of damage etc.

Step no: 6

Property and its security

Now you must call emergency services so that your los angeles fire damaged property can be prevented from further looting.

Step no: 7

Clean up requirements

If the house is not destroyed and it is only damaged then you must have to clean it up, the clean up requirements are assessing the damage and then calling an expert from a fire damage restoration company. Damage can be in form of ashes, soot and charring, smoke and unwanted odors.

Step no: 8

Drying the home

You have to dry your home from the water that has been used in extinguishing the fire. This water, if not dried, can cause mold growth. The los angeles mold  damage can be more severe and it also affects the health of the individuals.

 

Flood restoration and water damage: Business Strategies

Uncategorized | Posted by
Sep 14 2014

Flood restoration companies and the los angeles water damage restoration experts sometimes have no or very little business for a couple of months. People call them for little damages like pipe leakages etc.  When floods hit or the heavy rain falls then their offices are crowded with the clients and their phone calls. The demand of their business suddenly rises in the flood seasons and during heavy rains.

Here we would discuss some business strategies that can help to highlight your restoration business. If you follow these strategies, there are a lot more chances that people will know about your business and will call you for your services.

Build up the business: media selection for ads

The one way is to give your ads in newspapers. This is an effective way to highlight and promote your business. Some companies and individual service givers do newspaper and radio advertising. This strategy is not always successful because people do not call them for carpet and furniture cleaning on regular basis. So these people forget about the newspaper ads when los angeles flood damages their home. The solution to this problem is giving ads in yellow pages and the other way is the insurance agents. The insurance agents and companies are a way of promoting and highlighting a business.

Time for the response

This is very important strategy because time matters a lot. If for a flood damage restoration, you get late then the mold growth and other damages after water damage may become severe. So the water damage restoration company must respond in time. They must be available every time like fire brigades.

Strategy for different types of water

There are three categories of the water that might cause damage. These include,

  • Clean water
  • Gray water
  • Black water

The water damage does not depend on the color of the water rather on the amount of contaminants that are present in the water. The water damage caused by the black water is more severe as compared to clean and gray water. The strategy of the company for restoration of damages caused by these three types of water must be very clear. The strategies depends upon these,

  • The restoration of damage by clean water is easy and it only needs soaking of the water and its drying
  • The restoration of damage by gray water depends upon the materials that are damaged by the water
  • The restoration of damage by black water is not easy and is very costly because most of the times items damaged by the black water must have to be discarded

 

REPAIRING A WATER-DAMAGED WALL

Uncategorized | Posted by
Sep 14 2014

When the walls of your house get damaged by the water, you can repair them without the help of an expert or professional restoration company. It is advised to call the experts because they know how to repair the damaged walls and they have all necessary items and equipments that can be very helpful in the repairing process. They are trained enough to go through all the situations that can come across while fixing a los angeles water damaged wall. But if due to some reason it is not possible to render the services of water damage Restoration Company then you can do it on your own. Follow these simple steps,

 

Step 1: Shutting off Power

Remove the outlet in the wall and shut off the main power before removing the outlet.

Step 2: Exposing the Wall

Start exposing the wall after the outlet has been removed. Cut of the mold using the utility knife. Baseboard can be removed by using the chisel and hammer.

 

Step 3: Removal of Rot

Rotted dry wall and moldy insulation must also be removed.

 

Step 4: Cut and Seal the Plywood

Now a plywood board replacement should be prepared.

 

Step 5: Sealing underneath the Window

The troubling area under the windows must also be painted. that is necessary for los angeles water removal.

 

Step 6: Preparation of the area outside the window

Now for preparation of the window from outside, clean the window sill and make it dry. Take out all debris from the weep holes. Now bead of caulk be applied to the cracks in the windows.

 

Step 7: Put Up Plywood

Now place the completely dry plywood board in the gap. Use two blocks behind this board for its support. Anchor this board in the existing studs of the window frame and fix it.

 

Step 8: Replacing the Outlets and Insulation

Replace the damaged outlets and insulations and use new insulation instead. The paper side must face the living area.

 

Step 9: Replacing the Drywall

Use a tape to mark the studs in the window. This will be helpful in finding these studs for the drywall adjustment afterwards. Place the new drywall in the desired place and then drywall mud should be applied to the seams. Allow the mud to dry completely. Process can be repeated if necessary.

 

Step 10: Replacing the Baseboard and Painting

Now you have to finally replace the base board and then paint it wit h color of your own choice.

 

 

Water Damage and the Internal and External Water Sources

Uncategorized | Posted by
Sep 03 2014

Water Damage and the Internal and External Water Sources

 

Water damage is the common problem in the areas where there is excess moisture or water exposure. The remedy of this problem might become costly and expensive because sometimes mold is hidden or unseen and its detection is not possible. The hidden mold can do more damage than the scene mold.

Water Problems: Identification

Following are some simple steps to identify the water problems in your home so that the water damage can be avoided or prevented.

Water bill of your home must be free of fluctuations so check your monthly bill regularly and keep an eye on the fluctuations and search for its reasons with the help of los angeles water restoration.

The water pressure of an average home is 50-70 pounds/square inch approximately. This pressure can be measured by a pressure gauge and if the pressure is high then pipes can experience premature failure.

Inspection of pipes and fittings must be done annually and ice makers, washing machines, dishwashers and sinks must also be inspected.

Water Sources

1-Internal

Te internal sources of water that can cause water damage are

  • Supply lines of water
  • Icemakers
  • Dishwashers
  • Water heaters
  • Washing machines

2-External

The water that might come from the external sources and causes water damage are

  • Plants
  • Gutters
  • Downspouts
  • Roofs
  • Mortar joints
  • Cracks
  • Foundations
  • Chimneys

Mold Growth: Detection

Mold growth is obvious in the moist houses. Mold has many different colors like blue, green, brown, white, orange or red. Its smell is musty and any occupant can recognize its presence with the help of this smell. It is a fungus present in air. The spores of this fungus attatch to different surfaces and a colony are formed. The mold feeds on the organic matters found in fabric, leather, drywall and paint. The mold is formed in the floors, gutters houseplants and window frames etc.

Mold is found usually in the moist homes where there are water leakages. Environmental conditions are also a main cause of mold. Right after the floods and hurricanes mold growth can be seen. Some mold is allergenic while some of them are toxic and can cause serious illnesses like cancer. Stachybotrys is a toxic mold that is also known as black mold. This mold is extremely hazardous for human health. Its color is black or green. Allergenic mold also causes respiratory issues.

 

Mold Growth and some products for its Removal

Uncategorized | Posted by
Aug 27 2014

Mold Growth and some products for its Removal

Almost all molds are allergenic and cause serious respiratory problems. If mold is allowed to grow then it forms a colony and its extensive growth can cause serious problems for the furniture and other items as well as the human health.  Some molds are even toxic and hazardous for human health. The toxic black mold is very poisonous and can even cause cancer and other fatal diseases. Mold should be removed from your house as soon as you see it anywhere by los angeles mold remediation. There are various products that are suitable for the removal of mold growth. These products include borax, hydrogen peroxide, ammonia, vinegar, tea tree oil, baking soda and detergents. Here we would discuss vinegar and ammonia. Natural products for cleaning the mold are vinegar, borax, tea tree oil and baking soda.

Mold Removal with Vinegar

Vinegar is a diluted and mild acid. It is very effective in cleaning of the mold species. Almost 82% of mold species are removed by the vinegar. It is natural and safe product for mold removal. This is because heavy fumes are not produced and it is not toxic like bleach.

Spray the white distilled vinegar on to the affected surface and leave it for 1 hour. Rinse it off after some time and let the surface dry. Do not mix water with the vinegar. This vinegar is easily available in the market. Vinegar can be used for removing mold from the tiles of bathroom or any other non-porous surface.

Mold Removal with Ammonia

Ammonia is a toxic chemical. It is harsh but an effective product for removal of mold from non-porous surface. it is not effective on the porous surfaces like wood and dry wall. Ammonia and bleach must not be mixed together. This is because chlorine and ammonia react and produce a very toxic gas. This gas was used as the chemical weapon in WW2.

For mold removal through ammonia a solution of 50% ammonia and 50% water should be sprayed onto the affected surface with the help of spraying bottle. Ammonia must be “clear ammonia”. Check the label when you buy the ammonia. Leave the surface for some time and clean the mold. Rinse off the solution with water. Some detergents also contain ammonia in them. Those detergents can also be used for removing mold. But be careful that ammonia and chlorine should never be mixed.

 

 

Black Mold: Removal through Cleaning Products

Uncategorized | Posted by
Aug 23 2014

Black Mold: Removal through Cleaning Products

Black mold is a toxic mold that can cause serious health hazards and sometimes even death of an individual. It usually grows in the damp, moist and dark areas and it is quickly and easily spreadable to other areas. As soon as you detect the presence of black mold in your home then the very first step should be an effort to clean it up. Always use personal protection equipment like gloves, goggles or face mask while cleaning the mold. Many household products can be used to remove the mold. Some are natural products while others are cleaning products generally used in the routine life. Here we would discuss the removal of mold through the cleaning products.

The cleaning products used for cleaning up the mold in homes are

  • Borax
  • Detergent
  • Ammonia

 

Method 1: Cleaning Mold with Borax

Borax is a cheap household product that is easily available in the market. It is an effective product for the removal of mold from homes. It works really well on the non-porous surfaces like tiles and glass made surfaces. First of all use HEPA vacuum to clean up the mold on the apparent surface so that the spores do not spread all over. Make a solution of 1 cup borax and one gallon water. Scrub away the mold with help of this mixture. You can use scrubbing brushes to clean the mold. Rinsing off the surface is not necessary.

Method 2: Cleaning with Detergent

The cleaning up of mold wit help of the detergent is very effective method for non-porous surfaces like glass or tiles. Mold is not killed by using this method but it is removed away from the surface. Make a mixture of 1 cup laundry detergent and 1 gallon of water. Spray this solution onto the moldy area and remove the mold with help of a brush or los angeles water damage. Rinse off the surface.

Method 3: cleaning with Ammonia

Ammonia is an effective product to clean up the toxic black mold from homes. Make sure that you are using clear ammonia. See the label while buying ammonia from the store. Ammonia can remove mold only from non-porous surfaces but not from the porous ones. Make a mixture of equal amounts of clear ammonia and water and spray it on the moldy area. Leave it for about2 hors and then wipe off the surface with help of a scrubbing brush. Now rinse the surface off and have a clean mold free surface.